IT News & Technology update

Provide comprehensive update related to Computer, technology, software, anti virus and another electric device

Tuning the Linux kernel for more aggressive network throughput

Written by IT News on 5:40 PM

The Linux kernel and the distributions that package it typically provide very conservative defaults to certain network settings that affect networking parameters. These settings can be tuned via the /proc filesystem or using the sysctl program. The latter is often better, as it reads the contents of /etc/sysctl.conf, which allows you to keep settings across reboots.

The following is a snippet from /etc/sysctl.conf that may improve network performance:

net.ipv4.tcp_window_scaling = 1
net.ipv4.tcp_syncookies = 1
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.tcp_rmem = 4096 87380 16777216
net.ipv4.tcp_wmem = 4096 65536 16777216

The above isn’t to replace what may already exist in /etc/sysctl.conf, but rather to supplement it. The first command enables TCP window scaling, which allows clients to download data at a higher rate by enabling extra bits in TCP packets that are used to increase the window size.

The second command enables TCP SYN cookies, which is often enabled by default and is extremely effective in preventing conditions such as SYN floods that can drain the server of resources used to process incoming connections.

The last four options increase the TCP send and receive buffers, which allow an application to move its data out faster so as to serve other requests. This also improves the client’s ability to send data to the server when it gets busy.

By adding these commands to the /etc/sysctl.conf file, you ensure they take effect on every reboot. To enable them immediately without a reboot, use:

# sysctl -p /etc/sysctl.conf

To see all of the currently configured sysctl options, use:

# sysctl -a

This will list all of the configuration keys and their current values. The sysctl.conf file allows you to configure and save new defaults; what you see from this output are the defaults defined in the kernel that are currently effective. To see the value of one particular item, use:

# sysctl -q net.ipv4.tcp_window_scaling

Likewise, to set the value of one item without configuring it in sysctl.conf — and understanding that it won’t be retained across reboots, use:

# sysctl -w net.ipv4.tcp_window_scaling=1

This can be useful for testing the effectiveness of certain settings without committing them to being defaults.

Related Posts by Categories



Widget by Hoctro | Jack Book
  1. 0 comments: Responses to “ Tuning the Linux kernel for more aggressive network throughput ”

Search This Blog

Ads and Sponsored by:



Want to subscribe?

Subscribe in a reader.